Proven Energy Cost Saving Solutions for
Residential and Commercial Clients
866-520-0202
We need distributors Worldwide
Click on "Distributors Needed"
Tab Above
MaxR100™ re-conditions, restores and maintains efficiency in air-conditioners, chillers & refrigeration systems, resulting in the reduction of kWh consumption.
MaxR100™ is an intermetallic compound that forms a permanent bond to metal surfaces. This action removes oil fouling, changes the thermal nature of the metal and lowers the boiling point of the refrigerant gas, resulting in a more efficient operating system with substantial savings in energy costs.
MaxR100™ forms a protective molecular layer that will NOT change mechanical tolerances. MaxR100™ contains no elements of the Halogen group, particularly Chlorine, Fluorine, nor Sulfur or Phosphorous. MaxR100™ does NOT contain PTFE (Teflon®) or any other particulate. MaxR100™ will NOT contaminate waste oil.
MaxR100 Benefits
Increases operating efficiency and performance
Protects the equipment and reduces wear & tear
Reduces mechanical failure and lost productivity
Contains no chemicals that form corrosive acids
Reduces operating costs
Removes refrigerant oil build-up
Inhibits corrosion & rust, no deposits
Saves on energy & replacement costs
Frequently Asked Questions
1. Will the additives settle out?
MaxR100™ will bond to the metal surfaces inside of the air-conditioning, chiller or refrigeration unit and become one with the metal surfaces. There are no particulates to settle out.
2. Is MaxR100™ compatible with all refrigerant oils?
Yes.
3. Will the protective film affect bearing tolerances?
MaxR100™ does not affect bearing, ring, or valve tolerances.
4. Does the additive improve mechanical seal life?
Yes.
5. Does the additive affect electric motors?
No.
6. In what temperature ranges can MaxR100™ be used?
Minus 50 degrees centigrade to 210 degrees centigrade.
7. What elastomers can be conditioned?
Compatible with Nitrile/PVC, Silicone rubber, Nitrile (NBR with min 30% nitrile), Acrylate rubber (ACM), Viton (Fluor rubber), Polyester (AU) and polyether (EU) urethane.
8. What are MaxR100™’s limitations?
MaxR100™ does not work in Brine Chiller applications.
9. Can MaxR100™ be used in different applications?
Yes, in all types of refrigeration, ice machines, air-conditioning and chillers, except for as stated above in item 8.
10. Is MaxR100™ similar to those "Engine Oil Additives"?
NO. We do not include chemical elements of the “Halogen” group, particularly chlorine and fluorine, nor sulfur or phosphorous which may combine with hydrogen and form highly undesired (corrosive) acid. MaxR100™ does not contain PTFE (Teflon ) or any other particulates like powdered metal or plastics.
11. My air-conditioning system doesn't have enough capacity. Will MaxR100™ help?
If your air-conditioning is under-sized, MaxR100™ will not help that problem. If the air-conditioning system is not performing because of age and oil fouling, MaxR100™ will definitely bring the system back to near new efficiency.
12. If I have a compressor burnout, how will this affect my installation?
A compressor burn out leaves oil fouling in the system and MaxR100™ will clean up the condenser and improve the performance of the new compressor. MaxR100 will also help prevent future burn outs, except for gas leaks that may cause a compressor failure.
13. When MaxR100™ is installed, will I see immediate results?
MaxR100™ takes 10 to 14 days to see the best results. You will notice that the compressor will run quieter and vibration will be reduced within a few minutes.
14. If I replace my compressor will I need to re-treat my system?
We recommend a re-treatment using 50% the amount of the original quantity of MaxR100™.
15. Will installation void my existing warranty?
No. If the manufacture tells you that it will void your warranty, ask them to put it in writing. They will only say, if the manufacture proves that MaxR100™ damages you system they will void your warranty. It has been our experience that most air-conditioning systems we treat are out of warranty.
16. What is the MaxR100™ Warranty?
If it is proven that MaxR100™ caused the equipment failure, we will replace or repair the equipment, backed up by a 5 million dollar liability insurance policy. In over 12,000 installations we have never had an equipment failure.
Double click here to add text.
